Rust is everywhere. You can’t name something metallic that you haven’t ever seen rust on. If you can then they have most likely been treated from rust. There are many products around us that are made of steel. Starting from our cars, to motorbikes to door handles to locks to door hinges, you name it. Cars and some other materials are mostly covered with rust proof paint coatings. This helps the metal protect itself from the rust and its effects. But objects like bicycles are exceptions to this luxury, and therefore we mostly see them catching rust. Even if the frame is safe, the gear sprockets on your bicycle can develop severe rust on them. Therefore, it’s best to aim for rust removal so that your gears don’t get ruined. If you want to use your bike again, then rust removal is the way to go.
Step 1 Remove the Chain for Rust Removal
Wear gloves and carefully take the chain off the sprockets. This helps to create more space for you to clean the gear sprockets and will ensure no dirt or rust is left behind on the sprockets under the chain. This step is an important part of the process of achieving rust removal for your gear sprockets.
Step 2 Clean the Dirt for Rust Removal
Take a clean piece of cloth and carefully dust the sprockets away from the most visible sitting dust on the sprockets for rust removal. While you do this, always ensure your safety first. There is a risk of you injuring yourself from small and sharp edges of the gear sprockets and other small parts nearby.
Step 3 WD-40 For Rust Removal
You are almost on your way to rust removal. Once you are done removing the visible dirt from the sprocket, you need to get rid of the grease buildup and using the cloth. After getting as much of the grease and dirt from the sprockets, now you need to clean the rigid buildups using a cleaning agent. This is where WD-40 comes into play. Spray WD-40 in good amounts on the buildup and let it rinse the entire set of gear sprockets. You will see the grease and dirt wash away. You are almost at the point where you have been able to get the rust off.
After rinsing the sprockets, it is now time to clean the sprockets to get the rust off them. All you need is some WD-40.
Spray the WD-40 on the sprockets in good amounts and scrub them using the toothbrush. Once you are done, spray them again to wash off the residue. There you have it, you have achieved rust removal and your bike now works again.
To follow all the news of WD-40 Africa, follow us on Facebook and Instagram !
